Breaking Down The (Dirty) Details On Wastewater Treatment


Between showering, cooking, doing a load of laundry and washing the dishes, we go through a lot of water. In fact, a typical family produces approximately 200 gallons of wastewater each and every day.

In addition to the municipal wastewater that comes from our homes, restaurants, and commercial businesses, there’s also industrial wastewater from factories. Long story short: there’s a ton of used, dirty water in the world, and it all has to go somewhere.

Because most of that wastewater ultimately ends up back in local rivers or streams, there are a few steps Aqua takes to make sure it is impeccably clean before it gets there.

We spoke with Tom Bruns, president of Aqua Indiana, to learn exactly what those steps are.

Okay, I just flushed the toilet. Now what?

The second you flush (or drain, or pour, or rinse), the used wastewater shoots down a pipe, merges with other people’s sewage and flows off to a treatment plant for some intensive cleaning.

wastewater-process-image.png

First up is the screening process. Because solid objects, such as money, jewelry, toys, personal hygiene products and wipes might accidentally make their way into our wastewater, it’s important to first filter out these items so they don’t clog up the treatment system. Note: While some wipes call themselves “flushable,” they cause all sorts of problems in wastewater collection systems, so throw them in the trash instead of flushing.

After the initial screening, it’s time for gravity to do some of the heavy lifting. Cue primary clarification. During clarification, heavier materials (think: toilet paper) sink to the bottom of the tanks, while lighter ones (like the leftover oil and grease from last night’s dinner) float to the top. All of that gunk is then skimmed out.

Is that it for the gunk?

We’re glad you asked. Because most of that gunk, like feces, bodily fluids and foods, will not settle on its own, microscopic organisms are introduced into the mix to help break down organic material.

 wastewater-process-part2.png

During this process, which we refer to as biological treatment, the microscopic organisms consume the waste (yum!) and transform it into solid particles that are captured through a round of final clarification and removed from the tank once and for all.

Just because the sludge and gunk is gone, though, does not mean that the water is squeaky clean. In fact, if the water were to re-enter our world at this point, a lot of people would end up very sick. The water must first be disinfected with the help of ultraviolet light, which is beamed onto the water to sterilize and eliminate any remaining disease-causing organisms.

After all that, it’s time to discharge the final product. Most of the treated water is fed back into local rivers or streams. In areas of the country where water supplies are limited, this treated effluent water is often used to irrigate parks or golf courses. How’s that for a little something to think about next time you find yourself admiring the greens on hole nine?

Why do we do all of this, anyway?

Sure, it may seem like a lot of effort to put into something as undesirable as wastewater, but it’s something we have to do, especially if we don’t want to be living in our own filth. More importantly, though, we treat wastewater in order to prevent pollution, protect our health, protect wildlife and, of course, protect our environment.

Now that we’ve covered the ins and outs of the ways in which Aqua treats different types of water, we’re ready to go green and figure out exactly how Aqua stays sustainable and eco-friendly throughout the year. See you back here next month where we’ll celebrate Earth Day and all the ways in which Aqua does its part for the environment.